|
The PARK AIR Ejecto Super Punch is the original design for bank punching holes for poly, film or foil. An innovative knock out system removes slugs below web plane. A pneumatic control system balances all cylinders to act simultaneously permitting operation at speeds up to 250 plus cycles per minute.
The knock out works only when the punch moves toward the upward position. Cut slug material is pushed out beneath the film. No slugs pass through the nip rollers.
An optional slug collection system using a Venturi valve vacuums slugs into a receptacle eliminating the problem of slugs on the floor. An electric vacuum is available as an option.
Holes are 1-1/2" on center across bag machine. Multiple banks can be mounted on 2" minimum centers in the web direction. Standard sizes up to 7/16" diameter. Banks can also be designed for large diameter cutters.
All Ejecto Punches are manufactured from a tough, shock-resistant steel which has been heat treated for maximum surface hardness. This assures longer life, less maintenance, and minimal repairs. No metal-to-metal contact means minimum wear for maximum life.. For intermittent machines only.
FEATURES/ BENEFITS
. Hole sizes: 5/32", 3/16", 1/4", 5/16", 3/8", and 7/16"
. Electrically activated, air powered
. New perforating concept with lowest per punch price
. Uses less than 1 cubic inch of air per cylinder per cycle
. Super filter regulator for positive, clean, dry air
. Updating of original style units quoted on request
. Any width quoted on request
. 1-1/2" center distance across web
. Up to 250 cycles per minute standard
. Treated Ejecto punches for durability
. No metal-to-metal contact
. Standard sizes:
--24" width - 16 holes
--30" width - 18 holes
--40" width - 27 holes
--55" width - 37 holes
. Optional slug collection systems
|
