|
This Park Air unit is for use on materials requiring a clean edged round hole. The unit can be used on cellophane or poly propylene without worry about fractures of the web. The unit is also good for shrink films. This unit is for use on a stationary web. A single hole ball and die unit, it is activated by the pulse from the converting machine and powered by compressed air.
Uses 0.5 cubic inches of air per cycle and is ”ready-to-work” as soon as the air line and pulse line are connected. The PARK AIR patented punching system has free air "waiting" to activate the cylinder at a given signal from the pulse of the converting machine, cylinder rod hits the punch "home" to make a clean round hole with known air pressure.
Utilizing a heavy-duty repairable cylinder, requiring only inside replacement parts for a lifetime of use.
Sharpening Service: After initial purchase of die buttons, you will never buy another one, with our low cost sharpening service. Send a minimum of 6 die buttons at a time, and sharpened die buttons are shipped to you immediately upon receipt of same.
FEATURES
. Fits any intermittent machine
. Hole sizes 1/8", 1/4", 5/16", 3/8", 7/16"
. In stock item
. Electrically activated
. Air powered
. 1-1/4", 4", 8", & 12" throat depth
. Patent No. 3-299-761
|
