line

Printer Friendly Version

Home        Enquiries        News        Events

email

ROT Poly Bag Hole Punching Machines

ROT Hole Punching

"ROT" is a new option for all our "bridge frame" supporting structure.

It is a mechanism which allows to tilt forward the lower beam of the supporting structure in order to facilitate material threading and rapid maintenance of dies.

Following a custom development  for a Multi-National customer, Maklaus has developed a system to punch a hole similar in appearance to that made by a normal crowned punch, with a continuous punch system.

The punched hole is formed in a circle with small cuts that break the circumference of the hole leaving the slug connected to the rest of the film in small grip points.

By pushing the slug (when material is under tension), it breaks out leaving a circular hole on the material. When punching on the edge of tubular or folded film (bottom drawing), it will create a half circle impression that will form again a round hole.

PRE-CUT HOLE

 

Jenton International UK
9/10 Ardglen Industrial Estate, Evingar Road, Whitchurch, HAMPSHIRE RG28 7BB
UNITED KINGDOM
Tel:+44 (0)1256 892194  Fax:+44 (0)1256 896486
sales@jenton.co.uk

 

HOME  |  FIND US | NEWS | EVENTS | ENQUIRIES
poly bag machines : poly bag attachments : slitter/rewinder hole punch : ink roller cleaning : viscosity controls : web cleaning device